VERTICAL PRESS VMP 300 T/2500cc - Mod. 0302
TECHNICAL DATA
| Mould closing force | ton | ton300 |
| Surface opening force | ton | 6.8 |
| Max. mould closing travel | mm | 20 |
| Mobile surface shifting travel | mm | 510 |
| Max gap between surfaces | mm | 1050 |
| Minimum mould thickness | mm | 70/450/500 |
| Net sizes of the heating surface | mm | 600×790 |
| Frame travel | mm | 490 |
| Mobile surface travel | mm | 600 |
| Internal extractor travel | mm | 120 |
| External extractor travel | mm | 120 |
| Injection capacity | Cm3 | 2500- |
| Pressure on the material to inject | Kg/cm2 | 1800 |
| Punch diameter | mm | 85 |
| Plasticizing screw diameter | mm | 45 |
| Injection unit travel | mm | 320 |
| Thermoregulation zone | NO. | 2 |
| Max screw rotation speed (no load) | g/1’ | 10/120 |
| Max operating pressure | Bar | 175 |
| Pump capacity | Lt/1’ | 78 |
| Oil tank capacity | Lt ~ | 300 |
| Heating surfaces | Kw | 8.5×2 |
| Pump motor | Kw | 22 |
| Control units | Kw | 3×2 |
| Total power | Kw | 48 |
| Press weight | ton ~ | 12,5 |
