VERTICAL PRESS - VMP 150T/650cc - Mod. 0101
| Mould closing force | ton | 150 |
| Surface approaching force | ton | 6,8 |
| Max. mould closing travel | mm | 25 |
| Column gap | mm | 450×450 |
| Max gap between surfaces | mm | 760 |
| Minimum and maximum mould thickness | mm | 50/350 |
| Net sizes of the heating surface | mm | 430 x590 |
| Frame travel | mm | 350 |
| Shifting surface | Sì | |
| Mobile surface travel | mm | 400 |
| Internal extractor travel | mm | 80 |
| External extractor travel | mm | 80 |
| Injection capacity | Cm3 | 650 |
| Pressure on the material to inject | Kg/cm2 | 1800 |
| Injection unit travel | mm | 360 |
| Thermoregulation zone | N° | 2 |
| Max screw rotation speed (no load) | g/1’ | 10/120 |
| max operating pressure | Bar | 175 |
| Pump capacity | Lt/1’ | 55,5 |
| Oil tank capacity | Lt ~ | 280 |
| Heating surfaces | Kw | 4,8×2 |
| Pump motor | Kw | 18,5 |
| Control units | Kw | 3×2 |
| Total power | Kw | 35 |
| Press weight | ton ~ | 8 |
